Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual User Manual
Page 94
Advertising
Publication DNET-UM003A-EN-P - August 2000
3-42 Connect Devices and Commission Nodes
You return to the main project screen. Notice that the ArmorBlock
MaXum I/O name has changed.
6.Place the cursor over the ArmorBlock MaXum icon on the
network diagram.
You see the device description that you entered appear at the lower
left-hand corner of the screen.
7. Save your network file.
Advertising