Metrohm tiamo 2.4 Manual - Manual (Page 1334)

6.2 Administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1318 ￭￭￭￭￭￭￭￭
tiamo 2.4
Input range 1 - 999 days
Default value 365 days
6.2.2.3 Test login for password monitoring by Windows
Tab: Configuration ▶ Tools ▶ Security settings ▶ Login/Password protec-
tion ▶ Test login
If the Password monitoring by Windows option (see Chapter 6.2.2.2,
page 1313) is activated, then the Windows password of the user must be
entered in this dialog window. The test login is used to check whether the
user name matches the Windows user name.
User
Shows the current user name.
Password
Entry of the Windows password.
It is only when the test login is successful that the Password monitoring
by Windows can be used.
6.2.2.4 Audit Trail / Modifications
Tab: Configuration ▶ Tools ▶ Security settings ▶ Audit Trail/Modifications
The recording of the Audit Trail is switched on and off on the Audit
Trail/Modifications tab. When a method, a determination or sample
data is modified, it can also be defined whether or not a reason and a
comment must be given for the modification.
Audit Trail
Enable Audit Trail
If this check box is activated then all program actions will be automati-
cally recorded; these are defined as Audit Trail actions.
Selection on | off
Default value off
FDA default: on (can no longer be edited)
Modifications
Comment on modification of methods
If this check box is activated, then each time that a method is modified a
modification reason and a modification comment must be entered; these
are saved in the method and shown in the method history. The reason
and comments are also recorded in the Audit Trail.