Metrohm tiamo 2.4 Manual - Manual (Page 1477)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1461
Beaker radius samples
Radius of the beakers on the rack.
Beaker sensor
Defines the beaker sensors for the rack.
Device
Shows the devices to which the rack is attached.
Table view
The rack table cannot be edited directly. With a click on the column title
the table can be sorted according to the selected column in either increas-
ing or decreasing sequence. The table view can be adapted with the left
mouse button as follows:
￭ Drag the border between column titles:
Sets the column width
￭ Double-click on the border between column titles:
Sets the optimal column width
￭ Drag the column title:
Moves the column to the required location
If the contents of a field is larger than the column width then the whole
contents will be shown as a Tooltip if the mouse cursor is kept on the
field.
With sample racks that are placed on a Sample Processor and are recog-
nized automatically the corresponding device name will be shown in the
Instrument column. In addition the line number will be shown with a
green background.
If a rack is reserved for a running determination or for manual control
then the line will be shown in gray and the rack cannot be edited until the
determination has been finished.
Functions
The menu [Edit] beneath the rack table contains the following menu
items:
New… Adds new rack manually (see Chapter 6.12.2.2, page 1462).
Delete Deletes the selected rack (see Chapter 6.12.2.3, page 1462).
Properties… Edits the selected rack (see Chapter 6.12.3.1, page 1463).
Print (PDF)… Outputs the rack table as a PDF file .(see Chapter 6.12.2.4, page 1462)