4 kft upol - control parameters, Control parameters – Metrohm tiamo 2.4 Manual User Manual
Page 831
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.4
■■■■■■■■
815
Start volume
Start volume
Volume to be dosed with the indicated dosing rate before the start of the
titration.
Titrando
Input range
0.00000 - 9,999.99 mL
Default value
0.00000 mL
Titrino
Input range
0.00 - 999.99 mL
Default value
0.00 mL
Dosing rate
Rate at which the start volume is to be dosed. The maximum dosing rate
depends on the cylinder volume of the exchange unit or dosing unit used.
Titrando
Input range
0.01 - 166.00 mL/min
Selection
maximum
Default value
maximum
Titrino
Input range
0.01 - 150.00 mL/min
Selection
maximum
Default value
maximum
Pause 2
Pause 2
Waiting time, e.g. for the electrode to settle down after the start or a
reaction time after the addition of the start volume. The pause follows at
the end of all the start conditions.
Input range
0 - 999999 s
Default value
0 s
5.6.3.5.3.4
KFT Upol - Control parameters
Tab: Method
▶ KFT Upol ▶ Properties... ▶ Control parameters
Command name
Name of the command.
Entry
25 characters