Metrohm tiamo 2.4 Manual - Manual (Page 1466)

6.10 Subwindow Global variables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1450 ￭￭￭￭￭￭￭￭
tiamo 2.4
Message
The message options can only be edited if monitoring for global variables
is switched on.
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the E-mail address defined under [E-
mail...] if this option is activated. The message is sent in text format.
[E-mail...]
[E-Mail] opens the Send E-mail window.
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted additionally to
the message defined above
Action
The actions can only be edited if monitoring for global variables is
enabled.
If during global variable monitoring it is found that the validity period has
expired then one of the following actions will be triggered automatically
at start test:
Selection Document message | Display message | Cancel
determination
Default value Display message
Document message
The message that the validity period of the global variable has expired
will be automatically saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period of the global variable has expired will be automati-
cally saved with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].