Metrohm tiamo 2.4 Manual - Manual (Page 800)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
784 ￭￭￭￭￭￭￭￭
tiamo 2.4
￭ Continuous dosing
The dosing continues to be carried out at the Max. rate until the
Control range is reached.
￭ Control range
Dosing is finely controlled in this range. Shortly before the endpoint is
reached, dosing is carried out only at the Min. rate.
Commands
Depending on the measured value one of the following two KFT com-
mands can be selected:
￭ KFT Ipol
Voltametric measurement with selectable polarization current (mea-
sured quantity voltage U).
￭ KFT Upol
Amperometric measurement with selectable polarization voltage (mea-
sured quantity current I).