Metrohm tiamo 2.4 Manual - Manual (Page 32)

1.10 What is new in tiamo 2.4?
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭
tiamo 2.4
￭ If the method parameter report of a method containing the release
commands RLS DOS and/or RLS DEV was output in the program part
Method or Database, the corresponding fields were not output in
the generated PDF file.
Configuration program part
￭ If a barcode reader and a balance were included first in the device con-
figuration for the light version, then it was no longer possible to
include Metrohm devices (the error was already eliminated in tiamo
2.3, Patch 1).
￭ The incorrect text designation for the colorimetric sensors was used
(Sensor instead of Colorimetric sensor) in the user administration
under "Access rights for group 'Group designation', Configuration,
Functions" (the error was already eliminated in tiamo 2.3, Patch 1).
￭ The online help for the Limit values for colorimetric sensor –
'Name of the colorimetric sensor' dialog window was missing (the
error was already eliminated in tiamo 2.3, Patch 1).
￭ After a pH calibration, the calibration date is also entered on the Cali-
bration data tab with the sensors, among other things. If, after a suc-
cessful calibration, the intelligent sensor was deleted from the configu-
ration and then included again, then the Date ELT could be seen in
the Calibration date field (the error was already eliminated in tiamo
2.3, Patch 1).
￭ In the online help for Export configuration data and Import con-
figuration data, the descriptions for Export templates and Elec-
trode type templates were not available (the error was already elimi-
nated in tiamo 2.3, Patch 1).
￭ If you cannot log in within the number of attempts specified in the
security settings and if at the same time the Message by e-mail
option is enabled, then an e-mail will be sent to the specified address.
Client name was output as text in the subject line of this e-mail, and
the associated value corresponded to the name of the computer;
Client name was replaced by Computer name (the error was
already eliminated in tiamo 2.3, Patch 1).
￭ If the settings in the user administration were output as a PDF, then it
could happen that the PDF file did not correspond with the settings in
the software for some elements.
￭ The input range for the titer value of a solution was modified in the
online help.
￭ If the table of colorimetric sensors was sorted according to the date,
tiamo crashed.
￭ At least one titrant with invalid titer existed in the Titrants/Solutions
subwindow. If the table was then sorted according to titer, then noth-
ing was displayed in this program part (empty display).