Metrohm tiamo 2.4 Manual User Manual
Page 1667
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 How to proceed?
tiamo 2.4
￭￭￭￭￭￭￭￭
1651
If the determination is switched off then an asterisk (*) appears
behind all result values in the table and the line is shown as inactive
(gray); if it is switched on again then the asterisks will disappear.
NOTE
If the results of a determination are switched off, the statistics for
these results will be switched off when this determination is recal-
culated, i.e. no data for the mean value and standard deviations
will be shown. However, the determinations remain statistically
linked to each other so that the results can also be switched on
again.
6 Click on [Recalculate].
The selected determinations are recalculated. The results of this recal-
culation are entered automatically in the subwindow Result dis-
play.
7 In the dialog window Reprocessing click on [OK].
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and
the dialog window Reprocessing will be closed. This button is inac-
tive when the recalculation has not yet been triggered and if not all
the selected determinations could be reprocessed.
Edit curve evaluation
NOTE
The tab Curve evaluation is only shown when a single determination
is selected that contains curves that can be evaluated.
1 Change to the tab Curve evaluation.
2 In the field Command name, select the command whose curve is to
be displayed.
3 Click on [Edit].
The dialog window Curve evaluation opens for manually reprocess-
ing the curve evaluation.