Metrohm tiamo 2.4 Manual - Manual (Page 1694)

9.9 Reports
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1678 ￭￭￭￭￭￭￭￭
tiamo 2.4
9 In the list box Method, select the desired method and enter sample
data.
10 Click on [Apply].
The sample data entered will be applied in the respective line of the
working sample table.
11 Repeat step 8 for each desired determination.
12 Click on [Close].
The dialog window Edit line is closed.
13 If desired, click on the menu item Sample table ▶ Save as... in the
subwindow Run.
The dialog window Save sample table opens.
14 In the field Name enter a name.
15 Click on [Save].
The working sample table will be saved under the name entered as
sample table.
9.9 Reports
9.9.1 Creating report template
How to proceed?
1 Select program part Database.
2
NOTE
A database must be open in order to carry out subsequent steps.
Click on the menu item Tools ▶ Report tem-
plates ▶ New ▶ Form report… or Tools ▶ Report tem-
plates ▶ New ▶ Tabular Report….
The program window Report template with an empty report tem-
plate opens.