Metrohm 732 IC Detector - Manual (Page 121)

4 Operation
732 IC Detector / 733 IC Separation Center
114
4.7.2 <PROG R/S> key
R/S
PROG
The <PROG R/S> key is used to start or stop the program loaded in
the working memory. The status of the LED in the key indicates what it
can trigger:
LED off Program disabled
No action is triggered with the <PROG R/S> key. A
loop program can not be started until the parameter
" PROGRAM/parameters/status = enabled " has been
set.
LED lit up Program enabled
The <PROG R/S> key is used to start a loop pro-
gram. The current time is automatically set to
" 0.0 min " .
LED flashes Program running
The <PROG R/S> key is used to stop an ongoing
loop, remote or inject program.
If a program is running, the <PARAM>, <FULL
SCALE>, <METHOD> and <PROGRAM> keys
are locked.
4.7.3 <EVENT> key
EVENT
5
Under the <EVENT> key maximum 4 different events, which can be
triggered (once or daily) at a particular time, can be entered. These
events can each comprise up to 14 individual program points.
The <EVENT> key opens the following main menu:
EVENT
>EVENT/new Enter new event
EVENT
>EVENT/edit Edit existing event
EVENT
>EVENT/delete Delete individual event
EVENT
>EVENT/delete all Delete all events
Repeated pressing of the <EVENT> key selects the submenus in turn.
The individual inquiries of the submenus are accessed using the
<ENTER> key and exited with the <QUIT> key. The following listings
show all dialog items which appear under <EVENT>. The values
shown in the displays are the default values, the possible entry values
and ranges are shown below the display.