Metrohm 732 IC Detector - Manual (Page 81)

4 Operation
732 IC Detector / 733 IC Separation Center
74
Numeric keys of 732 IC Detector
Key Standby mode Edit mode
7
CONFIG
Open configuration menu
• Opens the main menu for configura-
tion of the 732 IC Detector.
• The settings in the configuration
menu are retained until they are
changed or the working memory
(RAM) is initialised.
Numeric entry ('7')
or
select submenu or parameter
• Selection of the next submenu in the
main menu.
• Selection of the next parameter in the
submenu.
PUMP R/S
8
Start/stop pump
• On/off switching of the pump drive of
the 709 IC Pump (if pump remote
controlled by 732 IC Detector).
Numeric entry ('8')
METHOD
9
Open method menu
• Opens the main menu for the recall,
storage and deletion of user-defined
methods.
Numeric entry ('9')
or
select submenu or parameter
• Selection of the next submenu in the
main menu.
• Selection of the next parameter in the
submenu.
ZERO OFF
4
Switch off auto-zero
• Switches off the auto-zero function
(green LED in the <ZERO> key
goes out).
Numeric entry ('4')
or
switch off auto-zero
• Switches off the auto-zero function
(green LED in the <ZERO> key
goes out).
EVENT
5
Open event menu
• Opens the main menu for the pro-
gramming, editing and deletion of
events.
Numeric entry ('5')
or
select submenu or parameter
• Selection of the next submenu in the
main menu.
• Selection of the next parameter in the
submenu.
PROGRAM
6
Open program menu
• Opens the main menu for the devel-
opment, editing and deletion of time
programs.
• Definition of program type.
• Set programs active/inactive.
Numeric entry ('6')
or
select submenu or parameter
• Selection of the next submenu in the
main menu.
• Selection of the next parameter in the
submenu.