Metrohm 732 IC Detector User Manual

Page 123

Advertising

4 Operation

732 IC Detector / 733 IC Separation Center

116

>EVENT
>EVENT/edit

Edit existing event

>EVENT/edit
event:YY-MM-DD HH:MM:SS

Select existing event
Selection of the event with the <SELECT> key.

Date and time of an existing event can not be

changed later.

EVENT YY-MM-DD HH:MM:SS
XXXXXXXXX ---

Edit program points
After confirmation of the selected date or time with

<ENTER>, it is possible to edit the maximum 14 pos-

sible program points of an existing event. Date and time

of the event then appear in the top line of the display,

whereas in the bottom line the program points associ-

ated with the event can be edited in turn. For all pro-

gram points, the default value

---

means that no

action follows.
Except for the missing parameter

flag

, the program

points for events are identical with the program points

which can be entered under the <PROGRAM> key and

are thus not described further here (see section 4.7.1).
In addition to this points, the program point

prog R/S"

can be entered (see under

">EVENT/new"

>EVENT
>EVENT/delete

Delete individual event

>EVENT/delete
event:YY-MM-DD HH:MM:SS

Select event for deletion
Selection of the event with the <SELECT> key.

<ENTER>

The event will be deleted

<QUIT>

Abort of the deletion operation.

>EVENT
>EVENT/delete all

Delete all events

>EVENT/delete all
delete all?

Confirm deletion of all events

<ENTER>

All events will be deleted.

<QUIT>

Abort of the deletion operation.

Advertising