Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1006)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
990 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Wavelength
Wavelength at which the measured quantity (absorbance) is recorded
Range 200.0 ... 1100.0 nm
Default value 400.0 nm
Integration time
Integration time for absorption measurement.
Range 0.01 ... 600000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are recorded and averaged.
Range 1 ... 10000
Default value 10
Smoothing
Number of neighboring pixels with which the light intensity is determined
for each measurement pixel.
Range 1 ... 100 Pixels
Default value 1 Pixels
Measurement
Measuring time
Duration of the absorption measurement.
Range 0 ... 999999 s
Default value 120 s
Measuring interval
Time interval for entering a measuring point in the measuring point list.
Range 0.1 ... 999999.0 s
Default value 2.0 s
Stop measured value
Stops when the preset measured value has been reached since the start of
the measurement.
Range 0 ... 4000 mAU
Selection off
Default value off