Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1099)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1083
Lower limit pH
Lower limit of the measured value. When the measured value falls below
this value, the event Measured value lower limit exceeded is triggered.
Titrando, 855
Range
-20.000 ... 20.000
Default value -20.000
Titrino
Range
-20.00 ... 20.00
Default value -20.00
Lower hysteresis pH
Lower hysteresis of the measured value. If the measured value exceeds the
lower limit by this hysteresis value, then the event Measured value lower
limit ok is triggered.
Titrando, 855
Range
0 ... 20.000
Default value 20
Upper limit pH
Upper limit of the measured value. If the measured value exceeds this limit,
then the event Measured value upper limit exceeded is triggered.
Titrando, 855
Range
-20.000 ... 20.000
Default value 20.000
Titrino
Range
-20.00 ... 20.00
Default value 20.00
Upper hysteresis pH
The upper hysteresis of the measured value. If the measured value once
again falls below the upper limit by this hysteresis value, then the event
Measured value upper limit ok will be triggered.
Titrando, 855
Range
0 ... 20.000
Default value 20
Action
Selection of the event to be triggered if the upper or lower limit is exceeded: