Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 799)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 783
851, 852
Selection
1 | 2 | 3 | 4 | off
Default value 1
off
No stirrer will be used.
Stirring rate
Setting the stirring rate. The algebraic sign of the stirring rate changes the
direction in which the stirring is done.
851, 852
Range
-15 ... 15
Default value 8
Switch on/off automatically
on | off (Default value: on)
If this option is enabled, the stirrer will be switched on automatically at the
start of the command and will be switched off automatically at the end of
the command.
5.6.3.6.3 KFC - Start conditions
Tab: Method ▶ KFC ▶ Properties... ▶ Start conditions
Command name
Name of the command.
Input 25 characters
Pause
Pause
Waiting time before the start of the titration.
Range 0 ... 999999 s
Default value 0 s
5.6.3.6.4 KFC - Control parameters
Tab: Method ▶ KFC ▶ Properties... ▶ Control parameters
Command name
Name of the command.
Input 25 characters