Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 293)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 277
– <methodRecDarkRefSpec> ... </
methodRecDarkRefSpec> Method during recording of the dark and reference spec-
trum.
– <detIDRecDarkRefSpec> ... </
detIDRecDarkRefSpec> Determination ID of the recording of the dark and refer-
ence spectrum.
– <calibDate> ... </calibDate> Calibration date.
– <calibUser> ... </calibUser> User during calibration.
– <calibMethod> ... </calibMe-
thod> Calibration method.
– <calibDetID> ... </calibDetID> Determination ID of calibration.
– </spectroData>
– <devicePorts dynamic=""> Data on the peripheral devices connected.
– <Port>
<subtype val="" /> Type of the device connected to the port:
XML_PORT_DEVICE_DOS = Dosing/Exchange unit
XML_PORT_DEVICE_REMOTE = Remote Box
XML_PORT_DEVICE_STIR = Stirrer
– <dosPortName> ... </dosPort-
Name> Number of the MSB connector the dosing device was con-
nected to.
– <dosType> ... </dosType> Dosing device type.
– <dosSerial> ... </dosSerial> Dosing device serial number.
– <exchDosUnit> Data on exchange/dosing unit.
– <exdosTitle> ... </exdosTitle> Designation of the exchange/dosing unit.
– <exdosName> ... </exdos-
Name> Name of the exchange/dosing unit.
– <exdosType> ... </exdosType> Type of exchange/dosing unit.
– <exdosOrder> ... </exdosOr-
der> Order number of exchange/dosing unit.
– <exdosSerial> ... </exdosSerial> Serial number of exchange/dosing unit.
– <cylVol> ... </cylVol> Cylinder volume of exchange/dosing unit.
– <cylSerial> ... </cylSerial> Cylinder serial number of exchange/dosing unit.
– <Solution> Data on solution.
– <solTitle> ... </solTitle> Solution title.
– <solutionName> ... </solution-
Name> Solution name.