Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1010)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
994 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Measured value
Range
0 ... 4000 mAU
Time
Range
0.0 ... 999999.9 s
5.6.4.15 STDADD man
5.6.4.15.1 STDADD man - Overview
Dialog window: Method ▶ STDADD man ▶ Properties... ▶ STDADD man - 'Command
name'
Command for Standard addition with manual addition of the standard
addition solution.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 857, 904, 905, 906, 907
pH/Ion - Meter: 867
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command STDADD man are configured on the
following 3 tabs:
￭ General/Hardware
Parameters for devices, sensors and stirrers.
￭ Standard addition
Parameters for standard addition.
￭ Measuring parameters
Parameters for setting the measurement procedure.
Standard addition curve
The standard addition curve with its evaluation data for a determination is
shown in the program part Database in the dialog window Calibration
curve, which is opened with the menu item Determinations
▶ Show
calibration curve... or the symbol .