Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1375)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1359
Rack name
Name for the new rack. The selected name must not already exist.
Input 25 characters
Rack code
Code of the new rack. The selected rack code must not already exist.
Input 6-figure binary pattern made up of 0 and 1
6.11.2.3 Deleting rack
Menu item: Configuration ▶ Rack data ▶ [Edit] ▶ Delete
With [Edit] ▶ Delete the rack selected in the rack list will be deleted.
6.11.2.4 Printing list of racks
Dialog window: Configuration ▶ Rack data ▶ [Edit] ▶ Print (PDF)… ▶ Print list of
racks (PDF)
[Edit] ▶ Print (PDF)… opens the dialog window Print list of racks
(PDF).
Orientation
Selection
Portrait | Landscape
Default value Portrait
Portrait
Prints rack table in portrait format.
Landscape
Prints rack table in landscape format.
[OK]
The rack table is shown in the required format as a PDF file and can be
opened directly with Acrobat Reader; it can then be printed and/or saved.
6.11.3 Rack properties
6.11.3.1 Editing rack properties
Dialog window: Configuration ▶ Rack data ▶ [Edit] ▶ Properties… ▶ Rack data
Rack name
Shows the name of the rack attached. If no rack is in position then "-----"
will be shown.
Rack code
Shows the number of positions on the rack in position. The rack code cor-
responds to the arrangement of magnets on the base of the rack and is read