Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 104)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
OPERATION / 95
Figure 73
Precharge Feature
MONITOR ONLY FEATURE
Monitor Only is typically used for ground drive applications to monitor
population with high and low alarms. All seeding control channels MUST be
disabled in this configuration and/or no rows assigned to those seeding
channels. Monitor only mode monitors up to 72 rows.
To Operate in Monitor Only mode:
1. Press the Control button and select Disabled as the channel.
2. Press the Materials button and change the type to Monitor Only.
Figure 74
Channel and Material Settings
3. Press the Row Monitor button. Select the associated material.
– Material Name only appears when the channel is disabled and
Monitor Only is selected. A material name is required to activate
associated high and low population alarms.