Operator’s manual, Linking channels and rates – Great Plains DICKEY-john MVT Monitor Operator User Manual
Page 56
Advertising
OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
CHANNEL SETUP / 47
LINKING CHANNELS AND RATES
Control channels 1 and 2 can be linked together so that rates can be
increased or decreased simultaneously and turned on or off simultaneously
during operation at the Main Work screen.
To Link Channels:
1. Press the Materials button.
2. Press the Linking button.
3. Highlight the Rate 1 box and select the linking symbol to control
channel 1 and 2 rates simultaneously.
4. Highlight the On/Off 1 box and select the linking symbol to control turn
channel 1 and 2 on and off simultaneously.
Figure 43
Linking Channel Rates
Advertising