Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 76)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
ACCESSORY SENSORS / 67
ACCESSORY SENSORS
Accessory sensors are optional and must be configured to operate with the
system. Sensors include:
• Pressure
• RPM
• Hopper
Performing an auto configuration detects the presence of hopper and
pressure sensors and automatically populates into the Accessory screen
fields.
An RPM sensor does not automatically populate and must be entered
manually.
The Pressure/RPM column displays the total number of RPM or pressure
sensors that are connected to each module. When a pressure or RPM
Sensor is entered into this column, the proper sensor numbering sequence
for each module is automatically entered into the MAP column based upon
the module address value.
The Accessory screen displays:
• Module address
• Module Type
• Number of pressure or RPM sensors
PRESSURE/RPM ASSIGNMENT
To Manually Assign Pressure or RPM Sensors:
1. Press the Accessory button.
2. Highlight either the Pressure or RPM yellow input box to enter the
number of sensors assigned to the module.
3. Push in the rotary knob to accept.
TIP: Press the Top Menu/Auto Config button to auto populate pressure
sensors and hopper sensors.
Figure 57
Accessory Assignment Screen