Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 28)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
VIRTUAL TERMINAL FEATURES / 19
VIRTUAL TERMINAL FEATURES
The Virtual Terminal (VT) is the main user interface with the IntelliAg
Planter Drill Control system. The terminal is mounted in the tractor cab for
easy accessibility.
POWER ON/OFF
The terminal is powered ON when the ignition key is turned ON and turns
OFF when the ignition key is turned off. A series of startup screens display
while the system is booting. The Top Menu (Setup) screen displays after
power up is complete.
DISPLAY
The terminal consists of the following features used for programming,
material selection, rate change, configuration file import/export, and
navigation:
1. Display screen (High definition 4.3” color display)
2. Rotary knob
3. Soft key buttons (8)
4. Home button
5. Screen toggle button
6. Escape button
Figure 18
Virtual Terminal
SOFT KEYS
The eight soft keys on the left and right of the display correspond to the
buttons on the display. Pressing the softkeys perform the action of the
button.