Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 45)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
36 / USER LEVELS
Figure 34
Enter Password
USING THE KEYPAD TO ENTER PASSWORD
6. At the Password screen, highlight the first entry box and push in the
rotary button to select.
7. At the virtual keyboard, turn the rotary dial to select the first number of
the password, which is 2.
8. Push in the rotary dial to select. The number appears at top.
TIP: Only 1 number can be entered at time. The entire 6 digits
cannot be entered at the keypad.
9. Select the green Check button to accept the number selection.
– The Password screen displays after the green Check button is
pressed.
10. Repeat steps 1-4 until all numbers are entered.
11. If a red bar appears in the top box that displays the chosen number,
the red Cancel button must be pressed and entry started again.
12. At the Password screen, press the OK button to finalize.