Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 30)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
VIRTUAL TERMINAL FEATURES / 21
Figure 19
Selecting a Value Using the Rotary Dial
USING THE KEYPAD
Numeric values are changed using a keypad. How the number is changed
can be accomplished using one of the methods detailed in step 3 (a through
c).
1. Turn dial to select the numeric value.
2. Push in the dial to open keypad.
3. The black field displays the current value. The value can be changed
as follows:
a) With the black field highlighted push the rotary dial in.
– The highlight changes from green to red.
– Turn the rotary dial clockwise to increase the value; counter
clockwise to decrease value.
– Push in the rotary dial to lock in value or;
b) Turn the rotary dial to highlight the increase or decrease button.
– Push in the rotary dial and continue to do so to increase/decrease
the value until the desired value displays.
– Push in the rotary dial to lock in value or;
c) Highlight the individual keypad numbers.
– Push in the rotary dial to lock in value or;
d) Clears the value displayed
e) Cancels the value displayed
f) Returns to previous screen and does not save changes made at the
keypad
4. Press the Check button to save selection and return to previous
screen.