Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 110)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
ALARMS / 101
ALARMS
Alarms display when an abnormal event occurs outside of normal
parameters. Alarms are typically in a full screen display describing the
alarm and may give instructions on how to fix the alarm. Each alarm has an
associated alarm number. Some alarms (such as the master/control switch
alarm) require a specific action by the operator before the alarm condition
will cease. In these cases, instructions are indicated on the alarm display.
Alarms can be acknowledged by pressing the Alarm Cancel button.
Detailed information about the alarm can be accessed by pressing the
Alarm Detail button.
ALARM LOG
The Alarm Log screen provides a list of specific alarms that have been
issued during system operation. Information displayed on the Alarm Log
screen is informational only and cannot be edited.
Each time specific alarm conditions are detected, it is logged and
communicated to the PCM.
To View the Alarm Log:
1. At the Top Menu screen, press the Next Page button.
2. Press the Alarm Log button.
– The number of the alarm and alarm description displays.
– Up to 20 alarms can be recalled.
– Each alarm occurrence can have up to 5 instances of the alarm
tagged with a date and time stamp.
3. To select specific Alarm details, press the Previous or Next buttons to
move the small display arrow next to the desired alarm number.
4. Press the Alarm Detail button to view all of the occurrences of the
selected alarm.
– The down arrow in the lower left at screen bottom signifies that
more alarms are present and accessible by pressing the Previous
or Next buttons.
Figure 78
Alarm Log