Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 44)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
USER LEVELS / 35
CHANGE OPERATOR LEVEL TO OEM/DEALER
LEVEL
To change from operator level to OEM/dealer level, a 6-digit password is
required. Password includes the five-digit serial number found on the label
of the Planter Control Module or on the Information screen.
1. Press the Top Menu button.
– At the Main Work screen, press the Work Screen button to access
the Top Menu button.
2. At the Top Menu screen, press the Next Page button.
3. Press the Information button.
4. At the Information screen, press the Password button.
Figure 33
Changing the Password
NOTE: Refer to section “Using Keypad
to Enter Password”. 5. On the Password screen, enter the 6-digit password as follows:
– Enter the first digit as 2 for User Level 2.
– For the next five digits, enter the Planter Control Module Serial
Number taken from the PCM or Information screen (example S/N
11685).