Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 91)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
82 / CUSTOMIZING THE WORK SCREEN
The delay time starts when the master/control switch is turned ON and the
implement is in a down position. Delay time will not start unless both of
these conditions are met.
IMPORTANT: This feature only operates with DICKEY-john virtual
terminals.
DATA ITEMS AND FUNCTIONS
Data items are display parameters that can be selected to appear on the
Main Work screen. Display parameter placement can be moved to display
on the Main Work screen to individual preferences.
CONTROL ACTUAL CHANNELS 1-2
Control Actual Channels 1 - 2 display the channel actual application rates in
its respective units depending on channel setup. The channel increment/
decrement or preset table rate value also displays.
– When the master/control switch is OFF, the target rate displays in a
small font for the channel.
– When the master/control switch is ON, the rate displays in a large
font and is the actual application rate.
– When the channel’s target rate is adjusted with the Inc/Dec or rate
table function, the new target rates display for 5 seconds, followed
by the actual rate.
– This Data Item displays on an entire row of the Work screen.
CONTROL TARGET CHANNELS 1-2
Control Target Channels 1 - 2 display the channel target set rates
depending on channel setup. The channel Inc/Dec value or preset table
rate also displays.
– When the master/control switch is OFF, the rate displays in a small
font.
– When the master/control switch is ON, the rate displays in a large
font.
– This Data Item displays on an entire row of the Work screen.