Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 82)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
GROUND SPEED / 73
GROUND SPEED
SETUP
Ground Speed Setup determines:
• The input source and ground speed sensor type
• The manual default ground speed (only displays when manual is
selected as source).
• Shutoff speed
• Minimum override
• Ground speed constant
• Master switch timeout
• Fail alarm delay
• Implement Lift
• Precharge speed (displays only when the Precharge time is greater
than 0 mph (0 kmh) on a Control Channel Setup screen)
To Set Ground Speed:
1. Press the Speed Set button.
2. Use the rotary dial to highlight the yellow input box.
3. Push in the rotary dial to select or enter a value.
4. Push in the rotary dial to accept.
Figure 62
Speed Set Screen
SOURCE
Selects the type of ground speed sensor used and where the sensor’s input
is located on the system.