Operator’s manual – Great Plains DICKEY-john MVT Monitor Operator User Manual
Page 36
OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
VIRTUAL TERMINAL FEATURES / 27
Figure 26
Unit Measurement
NOTE:
Remember to complete the
final step of highlighting the
ISOBUS button and pushing in
the rotary dial to accept saved
changes.
DATE/TIME
Adjusts the date and time format to regional preferences.
Time format choices:
•
12 hour clock
•
24 hour clock
Date format choices:
•
DDMMYYYY
•
DDYYYYMM
•
MMYYYYDD
•
MMDDYYYY
To Change Date and Time:
1. Highlight the Time input box and select 12 or 24 hour. Inc/dec buttons
(+/-) incrementally changes the hour, minute, and seconds.
2. Highlight the Date input box and select the desired format. Inc/dec
buttons (+/-) incrementally changes the month, date, and year.
3. To save the time and date changes made at this screen, use the rotary
dial to highlight the ISOBUS button.
4. Push in the rotary dial to save changes. The changes can be verified
by returning to the Main Work screen. If the ISOBUS button is not
selected and the rotary dial pressed, the changes will NOT be saved.
Figure 27
Date and Time