Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 71)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
62 / SYSTEM CONFIGURATION
Figure 54
Pre-Defined On/Off Patterns
BLOCKAGE PATTERN
Determines which sensors are used to calculate population and those used
only for blockage detection. Depending on the customer’s preference at the
time of purchase, either all Hi Rate sensors, all Recon Flow sensors, or a
combination of the two can be chosen.
The system can be configured for:
• Every Row Population (_ _ _ _ _)
Using all Hi Rate sensors
• Every Row Blockage (BBBBBB)
Using all Recon Flow sensors
• Every 2nd Row Block (_B_B_B_)
Even rows use Recon and odd rows use Hi Rate
• Every 2nd Row Pop (B_B_B_)
Even rows use Hi Rate and odd rows use Recon
PATTERN Description/Example
…… Every Row On
-X-X-X Every 2nd Row Off
X-X-X- Every 2nd Row On
--X--X--X Every 3rd Row Off
-X--X--X- Every 3rd Row Off
X--X--X-- Every 3rd Row Off
XX-XX-XX- Every 3rd Row On
X-XX-XX-X Every 3rd Row On
-XX-XX-XX Every 3rd Row On
---X---X Every 4th Row Off
--X---X- Every 4th Row Off
-X---X-- Every 4th Row Off
X---X--- Every 4th Row Off
XXX-XXX- Every 4th Row On
XX-XXX-X Every 4th Row On
X-XXX-XX Every 4th Row On
-XXX-XXX Every 4th Row On
--XX--XX--XX Twin Rows
-XX--XX--XX- Twin Rows
XX--XX--XX-- Twin Rows
X--XX--XX--X Twin Rows
On/Off Pattern Symbols:
Rows turned ON = -
Rows turned OFF = X