Dell POWEREDGE M1000E - Manual (Page 115)

4-7
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Chapter 4 Configuring Cisco EnergyWise
Managing Single Entities
Configuring Entity Attributes
Beginning in privileged EXEC mode:
Command Purpose
Step 1 show energywise (Optional) Verify that EnergyWise is enabled.
Step 2 configure terminal Enter global configuration mode.
Step 3 energywise importance importance (Optional) Set the importance of the entity.
The range is from 1 to 100.
The default is 1.
Step 4 energywise keywords word,word,... (Optional) Assign at least one keyword for the entity.
When assigning multiple keywords, separate the keywords with
commas, and do not use spaces between keywords.
• You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
• Do not use an asterisk (*) or a blank space between the
characters and symbols.
By default, no keywords are defined.
Step 5 energywise management udp-port-number (Optional) Specify the UDP port that sends and receives queries.
The range is from 1 to 65000.
The default is 43440.
Step 6 energywise name name (Optional) Specify the EnergyWise-specific entity name.
• You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
• Do not use an asterisk (*) or a blank space between the
characters and symbols.
The default is the hostname.
Step 7 energywise neighbor [hostname| ip-address]
udp-port-number (Optional) Assign a static neighbor.
• (Optional) Hostname (hostname) or IP address (ip-address).
• UDP port (udp-port-number) that sends and receives queries.
The range is from 1 to 65000.
By default, no static neighbors are assigned.
Step 8 energywise role role (Optional) Specify the role of the entity in the EnergyWise
domain. For example, lobby.b20.
• You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
• Do not use an asterisk (*) or a blank space between the
characters and symbols.
The default is the model number.
Step 9 end Return to privileged EXEC mode.