Dell POWEREDGE M1000E User Manual
Page 320
10-58
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Configuring IEEE 802.1x Authentication
Step 3
aaa new-model
Enables AAA.
Step 4
aaa authorization network default group
radius
Sets the authorization method to local. To remove the
authorization method, use the no aaa authorization network
default group radius command.
Step 5
radius-server vsa send authentication
Configure the radius vsa send authentication.
Step 6
interface interface-id
Specify the port to be configured, and enter interface
configuration mode.
Step 7
ip access-group acl-id in
Configure the default ACL on the port in the input direction.
Note
The acl-id is an access list name or number.
Step 8
show running-config interface interface-id
Verify your configuration.
Step 9
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose