Dell POWEREDGE M1000E - Manual (Page 1268)

Index
IN-8
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
configuring port-based authentication violation
modes
10-36
configuring small-frame arrival rate 26-5
config-vlan mode 2-2, 13-7
connections, secure remote 8-38
connectivity problems 47-10, 47-12, 47-13
consistency checks in VTP Version 2 14-4
console port, connecting to 2-11
content-routing technology
See WCCP
control protocol, IP SLAs 41-3
corrupted software, recovery steps with Xmodem 47-2
CoS
in Layer 2 frames 36-2
override priority 15-6
trust priority 15-6
CoS input queue threshold map for QoS 36-16
CoS output queue threshold map for QoS 36-19
CoS-to-DSCP map for QoS 36-60
counters, clearing interface 11-29
CPU utilization, troubleshooting 47-23
crashinfo file 47-20
critical authentication, IEEE 802.1x 10-51
cross-stack EtherChannel
configuration guidelines 37-12
configuring
on Layer 2 interfaces 37-12
on Layer 3 physical interfaces 37-15
described 37-2
illustration 37-3
support for 1-7
cross-stack UplinkFast, STP
described 20-5
disabling 20-16
enabling 20-16
fast-convergence events 20-7
Fast Uplink Transition Protocol 20-6
normal-convergence events 20-7
support for 1-7
cryptographic software image
Kerberos 8-32
SSL 8-42
switch stack considerations 6-2, 6-18, 8-38
customer edge devices 38-77
D
DACL
See downloadable ACL
daylight saving time 7-13
dCEF in the switch stack 38-91
debugging
enabling all system diagnostics 47-17
enabling for a specific feature 47-17
redirecting error message output 47-17
using commands 47-16
default commands 2-4
default configuration
802.1x 10-32
auto-QoS 36-21
banners 7-17
BGP 38-47
booting 3-17
CDP 27-2
DHCP 22-8
DHCP option 82 22-8
DHCP snooping 22-8
DHCP snooping binding database 22-9
DNS 7-16
dynamic ARP inspection 23-5
EIGRP 38-38
EtherChannel 37-10
Ethernet interfaces 11-17
fallback bridging 46-4
Flex Links 21-8
HSRP 40-6
IEEE 802.1Q tunneling 17-4
IGMP 44-39