Dell POWEREDGE M1000E User Manual

Page 542

Advertising
background image

21-14

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide

OL-13270-03

Chapter 21 Configuring Flex Links and the MAC Address-Table Move Update Feature

Monitoring Flex Links and the MAC Address-Table Move Update Information

To disable the MAC address-table move update feature, use the no mac address-table move update
receive
configuration command. To display the MAC address-table move update information, use the
show mac address-table move update privileged EXEC command.

This example shows how to configure a switch to get and process MAC address-table move update
messages:

Switch# configure terminal

Switch(conf)# mac address-table move update receive

Switch(conf)# end

Monitoring Flex Links and the MAC Address-Table Move
Update Information

Table 21-1

shows the privileged EXEC commands for monitoring the Flex Links configuration and the

MAC address-table move update information.

Step 3

end

Return to privileged EXEC mode.

Step 4

show mac address-table move update

Verify the configuration.

Step 5

copy running-config startup config

(Optional) Save your entries in the switch startup
configuration file.

Command

Purpose

Table 21-1

Flex Links and MAC Address-Table Move Update Monitoring Commands

Command

Purpose

show interface
[interface-id] switchport
backup

Displays the Flex Link backup interface configured for an interface or
all the configured Flex Links and the state of each active and backup
interface (up or standby mode).

show mac address-table
move update

Displays the MAC address-table move update information on the
switch.

Advertising