Dell POWEREDGE M1000E - Manual (Page 936)

38-44
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Chapter 38 Configuring IP Unicast Routing
Configuring EIGRP
Table 38-8 IP EIGRP Clear and Show Commands
Command Purpose
clear ip eigrp neighbors [if-address | interface] Delete neighbors from the neighbor table.
show ip eigrp interface [interface] [as number] Display information about interfaces configured for EIGRP.
show ip eigrp neighbors [type-number] Display EIGRP discovered neighbors.
show ip eigrp topology [autonomous-system-number] |
[[ip-address] mask]] Display the EIGRP topology table for a given process.
show ip eigrp traffic [autonomous-system-number] Display the number of packets sent and received for all or a
specified EIGRP process.