Authentication manager – Dell POWEREDGE M1000E User Manual
Page 269
10-7
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Understanding IEEE 802.1x Port-Based Authentication
Figure 10-4
Message Exchange During MAC Authentication Bypass
Authentication Manager
In Cisco IOS Release 12.2(46)SE and earlier, you could not use the same authorization methods, including
CLI commands and messages, on this switch and also on other network devices, such as Catalyst 6000
switches. You had to use separate authentication configurations. Cisco IOS Release 12.2(50)SE and later
supports the same authorization methods on all Catalyst switches in a network.
•
Port-Based Authentication Methods, page 10-8
•
Per-User ACLs and Filter-Ids, page 10-8
•
Authentication Manager CLI Commands, page 10-9
201762
Client
Switch
EAPOL Request/Identity
EAPOL Request/Identity
EAPOL Request/Identity
RADIUS Access/Request
RADIUS Access/Accept
Ethernet packet
Authentication
server
(RADIUS)