Dell POWEREDGE M1000E - Manual (Page 376)

13-10
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Chapter 13 Configuring VLANs
Configuring Normal-Range VLANs
You can also create or modify Ethernet VLANs by using the VLAN database configuration mode.
Note VLAN database configuration mode does not support RSPAN VLAN configuration or extended-range
VLANs.
Beginning in privileged EXEC mode, follow these steps to use VLAN database configuration mode to
create or modify an Ethernet VLAN:
To return the VLAN name to the default settings, use the no vlan vlan-id name or no vlan vlan-id mtu
VLAN database configuration command.
This example shows how to use VLAN configuration mode to create Ethernet VLAN 20, name it test20,
and add it to the VLAN database:
Switch# vlan database
Switch(vlan)# vlan 20 name test20
Switch(vlan)# exit
APPLY completed.
Exiting....
Deleting a VLAN
When you delete a VLAN from a switch that is in VTP server mode, the VLAN is removed from the
VLAN database for all switches in the VTP domain. When you delete a VLAN from a switch that is in
VTP transparent mode, the VLAN is deleted only on that specific switch or a switch stack.
You cannot delete the default VLANs for the different media types: Ethernet VLAN 1 and FDDI or
Token Ring VLANs 1002 to 1005.
Command Purpose
Step 1 vlan database Enter VLAN database configuration mode.
Step 2 vlan vlan-id name vlan-name Add an Ethernet VLAN by assigning a number to it. The range is 1 to
1001. You can create or modify a range of consecutive VLANs by
entering vlan first-vlan-id end last-vlan-id.
Note When entering a VLAN ID in VLAN database configuration
mode, do not enter leading zeros.
If no name is entered for the VLAN, the default is to append the vlan-id
with leading zeros to the word VLAN. For example, VLAN0004 is a
default VLAN name for VLAN 4.
Step 3 vlan vlan-id mtu mtu-size (Optional) To modify a VLAN, identify the VLAN and change a
characteristic, such as the MTU size.
Step 4 exit Update the VLAN database, propagate it throughout the administrative
domain, and return to privileged EXEC mode.
Step 5 show vlan {name vlan-name | id vlan-id} Verify your entries.
Step 6 copy running-config startup config (Optional) If the switch is in VTP transparent mode, the VLAN
configuration is saved in the running configuration file as well as in the
VLAN database. This saves the configuration in the switch startup
configuration file.