CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 151)

Port Information 9145E NID Software User’s Manual
Port Configuration
139
5.2.3.3 P-Bit Translation Table
The 9145E can change the P-Bit setting in VLAN ID tags on Service frames to change their
priority status in the network. To change incoming Priority Bit Translations, on the VLAN
Configuration screen (Figure 5-6) type 3 and press Enter. The P-Bit Translation Table (Figure 5-
10) opens.
1. To modify the P-Bit translation data, type the number of the P-Bit you want to translate (1
to 8), and press Enter. Type the P-Bit value and press Enter. Press Tab to change ports.
The P-Bit will be changed on the ingress direction for the port. Press Enter to confirm
changes.
2. To Enable or Disable P-Bit translation, type 9, press Enter, and Space bar to select Yes or
No. Press Tab to change ports.
Figure 5-10 P-Bit Translation Table
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V04.1 01:24:12
-------------------------------P-BIT TRANSLATION TABLE-------------------------
User Port Net Port
1) Incoming P-Bit 0 translated to 0 0
2) Incoming P-Bit 1 translated to 1 1
3) Incoming P-Bit 2 translated to 2 2
4) Incoming P-Bit 3 translated to 3 3
5) Incoming P-Bit 4 translated to 4 4
6) Incoming P-Bit 5 translated to 5 5
7) Incoming P-Bit 6 translated to 6 6
8) Incoming P-Bit 7 translated to 7 7
9) P-Bit Translation Enabled? No No
Select [1-9]:
------------------------------------Messages-----------------------------------