CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 248)

9145E NID Software User’s Manual Service OAM
Maintenance Intermediate Points
236
11.7 Maintenance Intermediate Points
Maintenance Intermediate Points (MIPs) are intermediate nodes within a Maintenance Domain or
Maintenance Entity Group. Up to 128 MIPs can be configured in a 9145E NID device.
11.7.1 Display Maintenance Intermediate Points
To display a list of existing MIPs, on the SOAM Configuration screen (Figure 11-7), type 6 and
press Enter. The Maintenance Intermediate Point List screen (Figure 11-33) opens.
Figure 11-33 Maintenance Intermediate Point List screen
11.7.2 Create a Maintenance Intermediate Point
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type A and press
Enter. You are prompted to enter A for 802.1ag or Y for Y.1731.
2. Type A or Y and press Enter. The Create a New Maintenance Intermediate Point screen
(Figure 11-33 for 802.1ag or Figure 11-34 for Y.1731) opens. The MD/MEG ID field is
highlighted.
3. Type an MD ID (for 802.1ag) or MEG ID (for Y.1731) and press Enter. (To view a list of
MD/MEGs, press CTRL-L, type S to select, and press Enter). The MIP ID field is
highlighted.
4. Type a MIP ID and press Enter. The Admin Status field is highlighted.
5. In the Admin status field, select Enabled or Disabled and press Enter. The Port field is
highlighted.
6. In the Port field, select User or Network and press Enter.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V04.10 05:15:27
---------------------MAINTENANCE INTERMEDIATE POINT LIST-----Display 1 - 3 of 3-
MIP ID LEVEL TYPE PORT MD/MEG NAME
1 0 802.1ag USER 2/
20 7 Y.1731 NETWORK 101/ag-comp-101
21 3 802.1ag NETWORK 1/Domain 1 (service)
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(A)dd new, (D)elete, (E)dit, ESC to return:
------------------------------------Messages-----------------------------------