CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 275)

Configuring EVC 9145E NID Software User’s Manual
EVC Configuration
263
12.2.4 Display EVC Statistics
EVC statistics can be displayed in both raw and current mode. Press CTRL-T to toggle between
the two modes.
1. On the EVC Record List screen (Figure 12-2), type S and press Enter. The current EVC
Record is highlighted.
2. Press the Space bar to scroll through the list and highlight the record for which you want
to display statistics.
3. Press Enter to select a highlighted record. The EVC Record Statistics (Current) screen
(Figure 12-12) opens.
4. To view raw statistics (Figure 12-13), press CTRL-T.
5. To reset all counters, type R and press Enter.
6. Press Esc to return to the EVC Record List screen.
.
Figure 12-12 EVC Record Statistics (Current) screen
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145E-101-3-0 V04.10 14:09:42
-----------------------EVC RECORD STATISTICS (CURRENT)--------------------------
EVC ID: 1067
User interface: USR
Network interface: NET
Multiplexing type: Service Multiplexing
C-VLAN level statistics: Enabled
Rx Frames at user port 2335593252 Rx Frames at network port 0
Tx Frames at user port 0 Tx Frames at network port 2335593252
Rx Bytes at user port 149477968128 Rx Bytes at network port 0
Tx Bytes at user port 0 Tx Bytes at network port 158820341136
Select [CTRL-T - current/raw, (R)eset counters, (C)-VLANs, ESC to return]:
------------------------------------Messages-----------------------------------