CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 180)

9145E NID Software User’s Manual Software Upgrade
Swap Bank After Download and Reset
168
To swap banks and reset the 9145E, type 2 and press Enter. Swap will be highlighted. Press
Enter. The flash memory banks will be swapped and the 9145E will reset.
NOTE: The software on the new inactive flash memory bank will remain in memory and not be
deleted.
Figure 8-1 Software Upgrade screen
8.3 Swap Bank After Download and Reset
Option 3 allows you to select automatically swapping banks on reset after a successful
download. Select Yes for automatically swap banks. Select No to have downloaded software
remain in the inactive bank. This option does not generate a reset.
Type 3 and press Enter. Press the Space bar to select Yes or No.
NOTE: Users will be disconnected when the 9145E is reset.
The flag must be set before the download of the new software while Swap Bank after Download
and reset is set. After downloading software, the message line will read Loads xx.xx on Next
Reset.
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-2009
9145E-101-2-0 V04.10 06:08:17
------------------------------------SOFTWARE UPGRADE---------------------------
Time Since Last Restart 5 days 05:11:07
Version File Name File Size
Active Firmware 04.10 9145E-A10(EB0063)-04-10.ZIP 3593789
Inactive Firmware 03.13 9145E-A10-03-13.ZIP 3100861
Bootcode 99.99 9145E-B00-99-99.BIN 334206
1) Software Reset Reset
2) Swap Bank & Reset Swap
3) Swap Bank after
download and reset Yes
4) Get New File with TFTP
5) Hardware Reset HW Reset
Select [1-5]:
------------------------------------Messages-----------------------------------