CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 266)

9145E NID Software User’s Manual Configuring EVC
EVC Configuration
254
12.2.1 Create an EVC Record
1. On the EVC Configuration screen (Figure 12-2), type 1 and press Enter. The EVC
Record List screen (Figure 12-3) opens.
Figure 12-3 EVC Record List screen
2. To create a new record, type A and press Enter. The Create A New EVC Configuration
Record (Figure 12-4) screen opens.
3. In the S-VLAN field, type an ID number and press Enter. The User Interface field is
highlighted.
NOTE: The S-VLAN ID can be untagged. This is indicated by a (U) after the S-VLAN ID .
4. In the User Interface field, press the Space bar to select a User Port and press Enter. The
Name field is highlighted.
5. In the Name field, type name for the record and press Enter. The Multiplexing Type field
is highlighted.
6. In the Multiplexing Type field, press the Space bar to select Service Multiplexing or All-to-
One and press Enter. The Administrative State field is highlighted.
7. In the Administrative State field, press the Space bar to select Up or Down. and press
Enter. The Statistics field is highlighted.
8. In the Statistics field, press the Space bar to select Disabled, S-VLAN, or C-VLAN and
press Enter. The S-Tag PCP Value field is highlighted.
9. In the S-Tag PCP Value field, press the Space bar to select Static, Copy from Ingress, or
Map from CVID, and press Enter.
10. In the Static/Default PCP Value field, specify a P-bits value between 0-7, and press Enter.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145E-101-3-0 V04.10 14:09:42
-------------------------------EVC RECORD LIST-----------------Items 1 - 3 of 3-
EVC USER MUX NAME STATS OPERATIONAL
ID PORT TYPE STATE
200(U) USR All-to-One Usr all-to-20 EVC UP
C-VLANs (All)
Select [(F)irst, (P)rev, (N)ext, (L)ast, (A)dd, (D)elete, (E)dit,
(S) Traffic Statistics, (O) Policing Statistics]:
------------------------------------Messages-----------------------------------