3 s-tpid/t-tpid configuration – CANOGA PERKINS 9145E NID Software Version 4.10 User Manual
Page 277
Configuring EVC
9145E NID Software User’s Manual
S-TPID/T-TPID Configuration
265
12.3 S-TPID/T-TPID Configuration
S-TPID and T-TPID are configured at the system level. The allowed values are 88A8 and 8100.
1. On the EVC Configuration screen, type 2 and press Enter. The S-TPID/T-TPID
Configuration screen (Figure 12-15) opens.
2. To edit the T-Tag TPID, type 1 and press Enter. Press the Space bar to select 88A8 or
8100, and press Enter.
3. Type A to accept your changes.
4. Press Enter to return to the S-TPID/T-TPID Configuration screen.
5. Press Esc to return to the EVC Configuration screen.
Figure 12-15 S-TPID/T-TPID Configuration screen
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145E-971-4-0 V04.10 10:55:13
-------------------------S-TPID/T-TPID CONFIGURATION---------------------------
S-Tag TPID: 88A8
1) T-Tag TPID: 8100
Select [1]:
------------------------------------Messages-----------------------------------