CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 250)

9145E NID Software User’s Manual Service OAM
Maintenance Intermediate Points
238
Figure 11-35 Create a New Maintenance Intermediate Point screen (Y.1731)
11.7.3 Delete a Maintenance Intermediate Point
When you delete a Maintenance Intermediate Point, it is also deleted from the AIS client lists.
1. On the Maintenance Intermediate Point List screen (Figure 11-33), type D and press
Enter. Press the Space bar to scroll through the list and highlight the entry you want to
delete.
2. Press Enter to delete the highlighted MIP. You are prompted to confirm the deletion.
11.7.4 Modify a Maintenance Intermediate Point
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type E and press
Enter. The current MIP is highlighted.
2. Press the Space bar to scroll through the list and highlight the entry to modify.
3. When the MIP you want to modify is highlighted, press Enter. The Maintenance
Intermediate Point Attributes screen for that MIP (Figure 11-36 for 802.1ag or Figure 11-
37 for Y.1731) opens.
4. To change the Admin Status, type 1 and press Enter. Select Enabled or Disabled and
press Enter. When a MIP is disabled, it does not process any requests it receives.
5. For 802.1ag, to view the VLAN list for that MIP, type 2 and press Enter. The MIP’s
Maintenance Association List opens. If you are configuring a Y.1731 MIP, the VLAN
number is displayed on the screen.
6. If you are configuring an 802.1ag MIP, type A to accept the settings and press Enter.
Press Esc to return to the Maintenance Intermediate Point Attributes screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V04.10 05:15:27
-----------------CREATE A NEW MAINTENANCE INTERMEDIATE POINT--------------------
1) MEG ID 0
2) MIP ID: 0
3) Admin status: Disabled
4) Port: User
Enter number in range 1 - 65535, or (CTRL-L) to select from list.
------------------------------------Messages-----------------------------------