CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 175)

Utilities 9145E NID Software User’s Manual
PING Generation
163
7.5 PING Generation
From the Utilities screen, type 5 and press Enter. The PING Generation screen (Figure 7-3)
opens.
PING Generation is also available from the Diagnostics screen. See the chapter on Diagnostics
for information on how to set up the Ping Generation screen.
Figure 7-3 PING Generation screen
7.6 Static ARP Table
The Static ARP table is used to define mapping between IP address and MAC address, and
assign them to a port, thus bypassing the ARP mechanism. A maximum of 10 static ARP entries
are available.
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-2009
9145E-101-2-0 V04.10 06:06:20
-------------------------------PING GENERATION---------------------------------
1) Ping to Address : 0.0.0.0
2) Ping from Address : Auto Selection
3) Ping Count : 0
4) Ping C-VLAN ID : 0
5) Ping T-VLAN ID : 0
6) Ping S-VLAN ID : 0
7) Ping Payload Size (40 - 9950) : 40
8) Ping DF Bit : Clear
9) Start Pinging
Select [1-9]:
------------------------------------Messages-----------------------------------