CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 176)

9145E NID Software User’s Manual Utilities
Dynamic ARP Table
164
From the Utilities screen, type 7 and press Enter. The Static ARP Table screen (Figure 7-4)
opens.
Figure 7-4 Static ARP Table screen
1. To add an entry to the static ARP table, type 1 and press Enter.
• Type the IP address and press Enter.
• Type the Mac address and press Enter.
• Type the port number and press Enter.
The address information is added to the table.
2. To delete an entry from the Static ARP Table, type 2 and press Enter. The first table entry
will be highlighted. Press the Space bar to scroll through the entries. Press Enter to
delete the highlighted entry.
3. Press Esc to return to the Utilities screen.
7.7 Dynamic ARP Table
The Dynamic ARP table lists currently active IP and MAC addresses for 9145E ports. Dynamic
ARP entries expire after 10 minutes, unless a message exchange takes place.
1. From the Utilities screen, type 7 and press Enter. The Dynamic ARP Table screen (Figure
7-5) opens. Type F (first), N, (next), P (previous) and L (last) to page through the entries.
2. To delete an entry from the table, type D and press Enter. The first entry is highlighted.
3. Press the Space bar to scroll through the list. When the address you want to delete is
highlighted, type CR and press Enter. The entry is deleted.
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-2009
9145E-101-1-0 V04.10 00:05:33
------------------------------------STATIC ARP TABLE---------------------------
IP Address MAC Address Port
--------------- ----------------- ----
92.168.1.102 45-54-25-88-74-22 User
94.148.1.156 46-57-55-81-73-21 Mgmt
45.122.4.121 44-52-44-23-76-98 Net
97.198.3.246 67-76-65-56-45-54 User
94.133.1.765 68-63-22-19-76-55 Net
Add or Delete an entry (1=Add, 2=Delete from table):
------------------------------------Messages-----------------------------------