CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 27)

System Configuration 9145E NID Software User’s Manual
IP/SNMP Agent Configuration
15
Figure 3-6 Tunnel Management screen
3.2.2 Auxiliary IP Configuration
The Auxiliary IP is an additional IP address that is provided for testing and connectivity only. It
allows the 9145E to be PINGed without allowing Telnet or Management access that could be
disruptive. The Auxiliary IP rate is limited to 500 pings per second. This allows connectivity and
rudimentary performance testing from subscriber/user VLANs without compromising network
security.
To configure the parameters, type the corresponding number and press Enter. Enter data or
press the Space bar to view the configuration choices for the parameters described below.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V04.10 04:52:33
----------------------------------TUNNEL MANAGEMENT----------------------------
Ports: User Net
1) Tunnel SOAM and PM/SAM Traffic Yes No
2) Tunnel In-band Management Traffic Yes No
3) Tunnel S-Tag VLAN ID (0 - 4094) 100 100
Priority (0 - 7) 0 0
4) Duplicate C-Tag Priority No No
Select [1-4]:
------------------------------------Messages----------------------------------