CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 18)

9145E NID Software User’s Manual Getting Started
Main Menu
6
Figure 2-2 Login screen
When you successfully log in, the Main Menu (Figure 2-3) opens. Use the Main Menu to access
all 9145E functions, including setup, diagnostics, and reports.
Refer to “Account Configuration” on page 29 and “Password Configuration” on page 26 for
information about configuring you account and changing your password.
CAUTION: If you lose both your Username and Password, return the unit to Canoga Per-
kins for Factory Service and reset.
2.4 Main Menu
Following is a brief description of the Main Menu items.
1. System Configuration The System Configuration screen is used to view and set values
for system information and TCP/IP management communications parameters.
2. Diagnostics The Diagnostics screen is used to set up various troubleshooting tests,
including Loopback, Latency/Jitter, PING tests, VLAN Loopback, or Cable Diagnostic.
3. Port Information The Port Information screen is used to ascertain the current conditions
for all ports in the 9145E, to set and view the configuration information for specific ports,
check Link Status and Layer 2 Statistics and configure Link Aggregation functionality.
4. System Alarms The System Alarms screen is used to view current alarm conditions.
5. System Log The System Log screen displays a list of recent traps, alarms, and events.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V04.10 11:14:16
--------------------------------------LOGIN SCREEN-----------------------------
Please Enter Login Username : admin
Please Enter Login Password : *****
------------------------------------Messages-----------------------------------