CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 267)

Configuring EVC 9145E NID Software User’s Manual
EVC Configuration
255
11. In the Tunnel VLAN field, press the Space bar to enable or disable Tunnel VLAN, and
press Enter.
12. In the Tunnel VLAN ID field, type an ID number between 1-4094, and press Enter. If the
Tunnel VLAN is disabled, this attribute is 0.
13. In the Tunnel Tag PCP Value field, press the Space bar to select Static, Copy from
Ingress, or Map from CVID, and press Enter.
14. To accept the new EVC record settings, type A and press Enter. The Modify EVC
configuration record screen (Figure 12-5) opens.
15. To modify an attribute value, type the number of the attribute and press Enter, or press
Esc to return to the EVC Record List screen.
Figure 12-4 Create a New EVC Configuration Record screen
12.2.2 Delete an EVC Record
1. On the EVC Record List screen (Figure 12-3), type D and press Enter. The current EVC
Record is highlighted.
2. Press the Space bar to scroll through the list and highlight the record you wish to delete.
3. Press Enter to delete the highlighted record. You are prompted to confirm the deletion.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145E-101-3-0 V04.10 14:09:42
--------------------CREATE A NEW EVC CONFIGURATION RECORD-----------------------
1) EVC ID (S-VLAN): 1000
2) Name:
3) Multiplexing type: Service Mux
4) Administrative state: UP
5) Statistics: Disabled
6) S-Tag PCP Value: Copy from ingress 7) Static/Default PCP Value: 0
8) Tunnel VLAN: Disable
9) Tunnel VLAN ID: 0
10) Tunnel Tag PCP Value: Copy from ingress 12) Static/Default PCP Value: 0
Select [1-12] for attributes:
------------------------------------Messages-----------------------------------