CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 247)

Service OAM 9145E NID Software User’s Manual
Maintenance End Points
235
Figure 11-32 Loopback Request screen (unicast regular)
11.6.6.2 Monitoring a Loopback Request
1. To stop current Loopback processing, on the Loopback Monitoring screen (Figure 11-28
for unicast, Figure 11-29 for sweep, or Figure 11-30 for multicast), type S and press
Enter.
2. To send another Loopback Request, type R and press Enter. The Loopback Request
screen (Figure 11-32) opens.
3. To see more Multicast Loopback results, type N and press Enter.
4. Press Esc to return to the Maintenance End Point Attributes screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V04.10 05:15:27
-------------------------------LOOPBACK REQUEST--------------------------------
1) MEP ID: 100
2) Mode: Unicast regular
3) Destination: MEP ID : 200
4) P-Bit value: 7
5) DE bit value: 0
6) Transmission rate (pps): 20
7) Number of packets: 10 (0 - unfinished)
8) Data TLV size: 0 LBM size: 64 (31)
9) Data TLV payload: << randomly generated >>
Select [1-9] for attributes, (S) to send:
------------------------------------Messages-----------------------------------